• Posted 12/19/2024.
    =====================

    I am still waiting on my developer to finish up on the Classifieds Control Panel so I can use it to encourage members into becoming paying members. Google Adsense has become a real burden on the viewing of this site, but honestly it is the ONLY source of income now that keeps it afloat. I tried offering disabling the ads being viewed by paying members, but apparently that is not enough incentive. Quite frankly, Google Adsense has dropped down to where it barely brings in enough daily to match even a single paid member per day. But it still gets the bills paid. But at what cost?

    So even without the classifieds control panel being complete, I believe I am going to have to disable those Google ads completely and likely disable some options here that have been free since going to the new platform. Like classified ad bumping, member name changes, and anything else I can use to encourage this site to be supported by the members instead of the Google Adsense ads.

    But there is risk involved. I will not pay out of pocket for very long during this last ditch experimental effort. If I find that the membership does not want to support this site with memberships, then I cannot support your being able to post your classified ads here for free. No, I am not intending to start charging for your posting ads here. I will just shut the site down and that will be it. I will be done with FaunaClassifieds. I certainly don't need this, and can live the rest of my life just fine without it. If I see that no one else really wants it to survive neither, then so be it. It goes away and you all can just go elsewhere to advertise your animals and merchandise.

    Not sure when this will take place, and I don't intend to give any further warning concerning the disabling of the Google Adsense. Just as there probably won't be any warning if I decide to close down this site. You will just come here and there will be some sort of message that the site is gone, and you have a nice day.

    I have been trying to make a go of this site for a very long time. And quite frankly, I am just tired of trying. I had hoped that enough people would be willing to help me help you all have a free outlet to offer your stuff for sale. But every year I see less and less people coming to this site, much less supporting it financially. That is fine. I tried. I retired the SerpenCo business about 14 years ago, so retiring out of this business completely is not that big if a step for me, nor will it be especially painful to do. When I was in Thailand, I did not check in here for three weeks. I didn't miss it even a little bit. So if you all want it to remain, it will be in your hands. I really don't care either way.

    =====================
    Some people have indicated that finding the method to contribute is rather difficult. And I have to admit, that it is not all that obvious. So to help, here is a thread to help as a quide. How to become a contributing member of FaunaClassifieds.

    And for the record, I will be shutting down the Google Adsense ads on January 1, 2025.
  • Responding to email notices you receive.
    **************************************************
    In short, DON'T! Email notices are to ONLY alert you of a reply to your private message or your ad on this site. Replying to the email just wastes your time as it goes NOWHERE, and probably pisses off the person you thought you replied to when they think you just ignored them. So instead of complaining to me about your messages not being replied to from this site via email, please READ that email notice that plainly states what you need to do in order to reply to who you are trying to converse with.

Flexwatt question

Paige n' James

Resident Demon
Resident Demon
Joined
Jun 16, 2010
Messages
398
Reaction score
27
Points
0
Location
Vacaville, CA
HI,
I am not electrically inclined and my husband doesn't know the answer.

Can I use one thermostat for 3 inch heat tape and 11 inch heat tapes if it has the same wattage?

Thanks, Paige :shrug01:
 
I'd proabably use two thermostats just to be safe. I'd rather spend the extra $50-$100 to not cook something:ack2:

I do have a 4" rack and 3" rack on the same t-stat, but they're both on dimmer switches that I adjusted until they matched temps (I bought the 3" b mistake).
 
You can.....but don't expect them to operate at the same temperatures, just because they are on the same thermostat.
 
That is exactly what I needed to know. I know the sizes are different but they are both the same wattage. If they won't stay the same I won't take any kind of chances like that with my babes. I owe it to them to be safe. : )

Was just hoping to limit my number of thermostats. Happy Friday!!
 
Look into the Ultra-therm Heat mats
Much better quality for the money then the old flex watt,
temps wont spike over 100*F like the flex watt
(even the low watt stuff spikes)
 
Thanks for your input Tommy. Had I gone that route to begin with would have stayed with it but I have a lot invested in the heat tape, thermostat and misc. V/R Paige
 
You can run different lengths of flex watt on the same thermostat providing the flexwatt is the same width.
 
I run 25' of 4" belly heat on my smaller bins, the style where it wraps through all shelves in one piece, and then I have 11" on my 8 larger tubs in 1foot sections all jumped together... Right now the stat runs at 88 on the 4" and with the 11" on the same stat it runs those bins at 81-82 which is perfect for right now since that's where all the breeders are. They will have to be moved to another stat again in a few weeks since there is no happy medium between the two
 
I run 25' of 4" belly heat on my smaller bins, the style where it wraps through all shelves in one piece, and then I have 11" on my 8 larger tubs in 1foot sections all jumped together... Right now the stat runs at 88 on the 4" and with the 11" on the same stat it runs those bins at 81-82 which is perfect for right now since that's where all the breeders are. They will have to be moved to another stat again in a few weeks since there is no happy medium between the two

are those temps of the flexwatt or cage temps?
 
Probe for the stat is under a hide in a bin on 4" tape, where the temp stays at 88. When i pit a digital thermo or my temp gun on the hot side of any of those bins with 4" they are at 88.
In the bins with 1 foot strips of 11" tape, the temp reads 81/82 with the temp gun or a digital temp guage. That rack is on the same thermostat.
Both racks are built the same and use 39qt rubbermaids, just with diff size heat sources.
 
Thats your problem,you have 2 different watt heat tapes. The 11" is not getting heat applied long enough to bring up temps. You'll have to use another t-stat or make a compromise between the 2 temps. Maybe try setting the probe under the 11" tape and setting temps to 86 and see where the temp is on the smaller tape.
I personally would just get another t-stat.
 
Skip my whole ad please. For some reason i was taken to page 2 and was answering Kraze.
Good luck
 
Skip my whole ad please. For some reason i was taken to page 2 and was answering Kraze.
Good luck

lol yeah i was just letting the OP know what the approx temp diff is between the two sizes... it works for me right now perfect, as the bigger breeders are on the 11" tape and the smaller females and juvis are on the 4. A month from now ill need the 11" on another thermo... which im still willing to trade for ;-) hahah
 
Back
Top