• Posted 12/19/2024.
    =====================

    I am still waiting on my developer to finish up on the Classifieds Control Panel so I can use it to encourage members into becoming paying members. Google Adsense has become a real burden on the viewing of this site, but honestly it is the ONLY source of income now that keeps it afloat. I tried offering disabling the ads being viewed by paying members, but apparently that is not enough incentive. Quite frankly, Google Adsense has dropped down to where it barely brings in enough daily to match even a single paid member per day. But it still gets the bills paid. But at what cost?

    So even without the classifieds control panel being complete, I believe I am going to have to disable those Google ads completely and likely disable some options here that have been free since going to the new platform. Like classified ad bumping, member name changes, and anything else I can use to encourage this site to be supported by the members instead of the Google Adsense ads.

    But there is risk involved. I will not pay out of pocket for very long during this last ditch experimental effort. If I find that the membership does not want to support this site with memberships, then I cannot support your being able to post your classified ads here for free. No, I am not intending to start charging for your posting ads here. I will just shut the site down and that will be it. I will be done with FaunaClassifieds. I certainly don't need this, and can live the rest of my life just fine without it. If I see that no one else really wants it to survive neither, then so be it. It goes away and you all can just go elsewhere to advertise your animals and merchandise.

    Not sure when this will take place, and I don't intend to give any further warning concerning the disabling of the Google Adsense. Just as there probably won't be any warning if I decide to close down this site. You will just come here and there will be some sort of message that the site is gone, and you have a nice day.

    I have been trying to make a go of this site for a very long time. And quite frankly, I am just tired of trying. I had hoped that enough people would be willing to help me help you all have a free outlet to offer your stuff for sale. But every year I see less and less people coming to this site, much less supporting it financially. That is fine. I tried. I retired the SerpenCo business about 14 years ago, so retiring out of this business completely is not that big if a step for me, nor will it be especially painful to do. When I was in Thailand, I did not check in here for three weeks. I didn't miss it even a little bit. So if you all want it to remain, it will be in your hands. I really don't care either way.

    =====================
    Some people have indicated that finding the method to contribute is rather difficult. And I have to admit, that it is not all that obvious. So to help, here is a thread to help as a quide. How to become a contributing member of FaunaClassifieds.

    And for the record, I will be shutting down the Google Adsense ads on January 1, 2025.
  • Responding to email notices you receive.
    **************************************************
    In short, DON'T! Email notices are to ONLY alert you of a reply to your private message or your ad on this site. Replying to the email just wastes your time as it goes NOWHERE, and probably pisses off the person you thought you replied to when they think you just ignored them. So instead of complaining to me about your messages not being replied to from this site via email, please READ that email notice that plainly states what you need to do in order to reply to who you are trying to converse with.

New rat rack...

AK907

Meh...
Resident Demon
Joined
May 16, 2010
Messages
410
Reaction score
22
Points
0
Location
Millersburg, Ohio, USA
Figured it was about time we needed to start a feeder colony. Snagged a couple of used 10 gallon aquariums real cheap in town since mortar mixing tubs are nowhere to be found around here. Kinda ghetto, but it works.
011-3.jpg

015-2.jpg
 
Sweet! How do you water the bottom three though? Are those ASF's?
 
Right now I only have stuff in the top two because as usual I bought too many feeders. I'll probably just use hanging water bottles until I can build an automatic watering system. Yes those are ASF. One is about ready to pop too. Gunna pick up some shavings and new water bottles at Wal-Mart today. For now they just have a water bowl and some newspaper. As always I changed my mind about 900 times while building it, so I improvised most of it. It works at least.
 
Gotta be careful with the shavings from Walmart. They are LOADED with oils. I had a whole colony on deaths bed. Tons of poryphin, red liquid that looks lke nose-bleeds. I used pine because i knew cedar was supposed to be bad. Pine isnt any better from my experience. My set up was just like yours. I switched to Cell-Sorb and it was like nothing ever happened. The poryphin cleared up in about a day, and they were fine. Hope this works out for you! Good luck and nice rat rack.
 
^Fear not, I got aspen. I too have seen that happens when you use cedar/pine. I know lots of people use pine without any problems, but I'll stick to aspen. I don't really like Care-Fresh bedding either. Too dusty.
 
I dont like the way carefresh smells. I use it temporarily for birthing. I might try to switch to aspen for a little while to see if that will work for me. I am paying about 23 dollars a bag for Cell Sorb. I dont know if you have ever used it, But it eliminates the odor COMPLETELY. At least untill it is used up and needs changed. It is probably 4 or 5 times as expensive, but in my opinion, it is worth every cent of you have the rats in your house and dont want the ammonia and poop smell. Im working on trying to get an exhaust fan set up, I think that would do wonders as well.
 
Right now I only have stuff in the top two because as usual I bought too many feeders. I'll probably just use hanging water bottles until I can build an automatic watering system. Yes those are ASF. One is about ready to pop too. Gunna pick up some shavings and new water bottles at Wal-Mart today. For now they just have a water bowl and some newspaper. As always I changed my mind about 900 times while building it, so I improvised most of it. It works at least.

I use to buy these really neat glass bottles but sometime about 6 months ago they started to use these new gaskets that would make the water stop dripping out and almost killed two rats. I went to three different stores and had the same problem after going through 6-8 bottles. I switched to the walmart one for like $3 and loved them, lol! Never had a problem. I still use them for my weaning tank.

For the shavings, I use to use this really thick cut pine from petco and thought it was great, but Deborah B. pointed out in a thread the problems people have using pine and I was gonna switch when the bag ran out. I never noticed any problems and since reading about the discharge, I've been keeping a watchful eye. Well I ran out of shavings and was dog-sick and didn't feel like driving 30 minutes to the pet store. I lived right by walmart so I grabbed a bag of their $8-9 pine litter and swore this was my last bag. Still, over a month later and almost through with the whole thing and no problems.

To be honest, I don't know if I will switch now until a problem arises. My rats are fat and healthy, seem to be getting larger, and have been on pine for almost a year with no problems. There are a lot of stuff on the internet that says pine is bad for rodents, but I can't find any proof. A lot stuff points to it being safe, but I see several people have the problems mentioned. I don't see how it will affect some rats and not others. Sorry, I'm seeing myself get off topic but this has been bugging me, lol.
 
I think if you are going to use pine you need EXCELLENT ventillation. I didnt have a very good exhaust setup when i used pine, so that could have been the problem.
 
You have Home Depot in Massillon, Ashland, and Canton...all under 50 miles from you.

The medium mixing tubs are about $6.00 and the large mixing tubs are about $12. I just picked up enough materials for two more large rat racks today.
 
Back
Top